On Mon, 12 May 2008 16:35:53 -0700 (PDT), Jatan <jat... at (no spam) gmail.com
wrote:
On May 12, 2:08 pm, Tim Wescott <t... at (no spam) seemywebsite.com> wrote:
What exactly are you trying to simulate? The motor as a load, or the
terminal behavior of the motor, with position out vs. volts in?
Are you asking which of the above mentioned tools would be best for this?
--
Tim Wescott
Wescott Design
Serviceshttp://www.wescottdesign.com
Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" gives you just what it says.
See details
athttp://www.wescottdesign.com/actfes/actfes.html
Behavior of the motor - showing outputs (voltage, current, speed) when
the up switch is pressed and then the same for when the down switch is
pressed with the motor spinning the other way to roll down a window
I guess I need an H-bridge type circuit
---
Yes.
Plus:
1. When the switch is released, and it goes to neutral, do you want to
brake the motor or let it coast to a stop?
2. Do you want to have limit switches at the ends of the window's
travel or do you just want stall current to be drawn until the
switch is released and goes to neutral?
JF- Hide quoted text -
- Show quoted text -
