| |
 |
|
|
Science Forum Index » Geology - Satellite Navigation Forum » Fugawi 4
Page 1 of 1
|
| Author |
Message |
| Oliver Fleming |
 Posted: Thu May 01, 2008 9:43 pm |
|
|
|
Guest
|
Hi,
I am using Fugawi 4.1. I used to be able to set a series of route points
and the auto-pilot would follow these without problem.
I installed a Noland Multiplexer, so I could interface my depthsounder
and have depths in the tracks instead of height.
This all works well.
However I now find Fugawi will no longer follow the route with the
auto-pilot.
I tried another Nav Program (OziExplorer) and although the function is
rated 'experimental' it works just as it should.
I have written to Fugawi, but there support is very poor and the contact
staff do not know much about anything ( they even said Fugawi does not use
the Autopilot APB sentence. It does of course and is listed in the manual
and help files. ). I have had so much trouble with this buggy software they
probably consider me a nuisance. I probably should buy something else but I
like the interface of Fugawi and am used to it, I really do not want to
learn another software.
If anybody has a solution or has had this problem I sure would like to
get a cure.
Thanks
Oliver Fleming |
|
|
| Back to top |
|
| Jack Erbes |
| Posted: Fri May 02, 2008 6:31 am |
|
|
|
Guest
|
Oliver Fleming wrote:
Quote: Hi,
I am using Fugawi 4.1. I used to be able to set a series of route points
and the auto-pilot would follow these without problem.
I installed a Noland Multiplexer, so I could interface my depthsounder
and have depths in the tracks instead of height.
This all works well.
However I now find Fugawi will no longer follow the route with the
auto-pilot.
<snip>
Maybe there is a difference in the NMEA sentences from Fugawi to Ozi
Explorer and the difference is causing the Noland multiplexer to not
passing all the sentences, an initialization string, or something like
that to the autopilot.
If might be worth the trouble to ask Noland about it since the sentences
from both softwares will work until the multiplexer is used.
If you can use Hyperterminal or another software to capture a log file
of the startup sentences and a few sets of APB sentences from the two
software, and post those here, maybe someone can spot the problem.
Jack |
|
|
| Back to top |
|
| Silver K |
| Posted: Sat May 03, 2008 6:54 am |
|
|
|
Guest
|
Try lowering your baud rate. I had this happen and all I had to do was
adjust the baud.
Silver |
|
|
| Back to top |
|
| Oliver Fleming... |
| Posted: Thu May 08, 2008 7:45 pm |
|
|
|
Guest
|
Here are the log files from both programs. I have set a waypoint and told
the programs to navigate to it.
Bear in mind OziExplorer works and Fugawi does not. I would like to know
what to do to get it going.
------------------------------------------------------------------------
OziExplorer Log File
---------
In - $GPRMB,A,,,,,,,,,,,,*27
In - $GPGLL,2755.439,S,15324.368,E,050944,A*3C
In - $GPAPB,A,,,,N,,,,,,,,,*4B
In - $SDDBT,,,0001.5,M,,
In - $GPBWC,050946,,,,,,T,,M,,N,*18
In - $GPVTG,322,T,309,M,00.0,N,,*12
*In - $GPRMC,050946,A,2755.439,S,15324.368,E,00.0,322,080508,13,E*66
Out - $GPAPB,A,A,0.00,L,N,V,V,344.5,M,1,344.5,M,344.5,M*0C
----------
--------------------------------------------------------------------------
Fugawi Log file.
$GPAPB,A,,,,N,,,,,,,,,*4B
$SDDBT,,,0001.6,M,,
$GPBWC,045845,,,,,,T,,M,,N,*1E
$GPVTG,320,T,307,M,00.0,N,,*1E
$GPRMC,0458$GPGLL,2755.439,S,15324.368,E,045845,A*38
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045847,,,,,,T,,M,,N,*1C
$SDDBT,,,0001.6,M,,
$GPVTG,026,T,013,M,00.0,N,,*1D
$GPRMC,045847,A,2755.439,S,1$GPGGA,045849,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*59
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045849,,,,,,T,,M,,N,*12
$SDDBT,,,0001.5,M,,
$GPGLL,2755.439,S,15324.368,E,045849,A*34
$GPGGA,045851,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*50
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045851,,,,,,T,,M,,N,*1B
$SDDBT,,,0001.5,M,,
$GPGGA,045853,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*52
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045853,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,,
$GPGGA,045855,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*54
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045855,,,,,,T,,M,,N,*1F
$SDDBT,,,0001.5,M,,
$GPGGA,045857,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*56
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045857,,,,,,T,,M,,N,*1D
$SDDBT,,,0001.5,M,,
$GPGGA,045859,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*58
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045859,,,,,,T,,M,,N,*1$SDDBT,,,0001.6,M,,
$GPGGA,045901,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*54
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045901,,,,,,T,,M,,N,*1F
$SDDBT,,,0001.6,M,,
$GPGGA,045903,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*56
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045903,,,,,,T,,M,,N,*1D$SDDBT,,,0001.5,M,,
$GPGGA,045905,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*50
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045905,,,,,,T,,M,,N,*1B
$SDDBT,,,0001.5,M,,
$GPGGA,045906,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*53
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045906,,,,,,T,,M,,N,*18
$SDDBT,,,0001.6,M,,
$GPGGA,045908,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*5D
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045908,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,,
$GPGGA,045910,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*54
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045910,,,,,,T,,M,,N,*1F
$SDDBT,,,0001.5,M,,
$GPGGA,045912,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*56
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045912,,,,,,T,,M,,N,*1D$SDDBT,,,0001.5,M,,
$GPGGA,045914,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*50
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045914,,,,,,T,,M,,N,*1B
$SDDBT,,,0001.6,M,,
$GPGGA,045916,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*52
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045916,,,,,,T,,M,,N,*19
$SDDBT,,,0001.5,M,,
$GPGGA,045918,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*5C
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045918,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,,
$GPGGA,045920,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*58
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045920,,,,,,T,,M,,N,*1C
$SDDBT,,,0001.5,M,,
$GPGGA,045922,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5A
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045922,,,,,,T,,M,,N,*1E$SDDBT,,,0001.6,M,,
$GPGGA,045924,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5C
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045924,,,,,,T,,M,,N,*18
$SDDBT,,,0001.6,M,,
$GPGGA,045926,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*51
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045926,,,,,,T,,M,,N,*1A
$SDDBT,,,0001.6,M,,
$GPGGA,045928,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*50
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045928,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,,
$GPGGA,045930,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*59
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045930,,,,,,T,,M,,N,*1D
$SDDBT,,,0001.5,M,,
$GPGGA,045932,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5B
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045932,,,,,,T,,M,,N,*1F$SDDBT,,,0001.5,M,,
$GPGGA,045934,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5D
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045934,,,,,,T,,M,,N,*19
$SDDBT,,,0001.5,M,,
$GPGGA,045936,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5F
$GPAPB,A,,,,N,,,,,,,,,*4B
$GPBWC,045936,,,,,,T,,M,,N,*1B
----------------------------------------------------------------------
Any help appreciated.
Thanks
Oliver Fleming
"Oliver Fleming" <ojfleming at (no spam) internode.on.net> wrote in message
news:Se-dnedGnpt_4ofVnZ2dnUVZ_hCdnZ2d at (no spam) internode...
Quote: Hi,
I am using Fugawi 4.1. I used to be able to set a series of route
points and the auto-pilot would follow these without problem.
I installed a Noland Multiplexer, so I could interface my depthsounder
and have depths in the tracks instead of height.
This all works well.
However I now find Fugawi will no longer follow the route with the
auto-pilot.
I tried another Nav Program (OziExplorer) and although the function is
rated 'experimental' it works just as it should.
I have written to Fugawi, but there support is very poor and the
contact staff do not know much about anything ( they even said Fugawi does
not use the Autopilot APB sentence. It does of course and is listed in the
manual and help files. ). I have had so much trouble with this buggy
software they probably consider me a nuisance. I probably should buy
something else but I like the interface of Fugawi and am used to it, I
really do not want to learn another software.
If anybody has a solution or has had this problem I sure would like to
get a cure.
Thanks
Oliver Fleming
|
|
|
| Back to top |
|
| WBH... |
| Posted: Thu May 08, 2008 8:59 pm |
|
|
|
Guest
|
In the Fugawi log, all the significant parameters in the NMEA APB sentence
are missing.
There is no auto pilot that can steer to a waypoint with this data.
Wout
"Oliver Fleming" <ojfleming at (no spam) internode.on.net> wrote in message
news:pZ6dnQWuYdA_A77VnZ2dnUVZ_hisnZ2d at (no spam) internode...
| Here are the log files from both programs. I have set a waypoint and told
| the programs to navigate to it.
|
| Bear in mind OziExplorer works and Fugawi does not. I would like to
know
| what to do to get it going.
| ------------------------------------------------------------------------
| OziExplorer Log File
| ---------
| In - $GPRMB,A,,,,,,,,,,,,*27
| In - $GPGLL,2755.439,S,15324.368,E,050944,A*3C
| In - $GPAPB,A,,,,N,,,,,,,,,*4B
| In - $SDDBT,,,0001.5,M,,
| In - $GPBWC,050946,,,,,,T,,M,,N,*18
| In - $GPVTG,322,T,309,M,00.0,N,,*12
| *In - $GPRMC,050946,A,2755.439,S,15324.368,E,00.0,322,080508,13,E*66
| Out - $GPAPB,A,A,0.00,L,N,V,V,344.5,M,1,344.5,M,344.5,M*0C
| ----------
| --------------------------------------------------------------------------
| Fugawi Log file.
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $SDDBT,,,0001.6,M,,
| $GPBWC,045845,,,,,,T,,M,,N,*1E
| $GPVTG,320,T,307,M,00.0,N,,*1E
| $GPRMC,0458$GPGLL,2755.439,S,15324.368,E,045845,A*38
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045847,,,,,,T,,M,,N,*1C
| $SDDBT,,,0001.6,M,,
| $GPVTG,026,T,013,M,00.0,N,,*1D
|
$GPRMC,045847,A,2755.439,S,1$GPGGA,045849,2755.439,S,15324.368,E,2,6,01,+000
4,M,,M,,*59
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045849,,,,,,T,,M,,N,*12
| $SDDBT,,,0001.5,M,,
| $GPGLL,2755.439,S,15324.368,E,045849,A*34
| $GPGGA,045851,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*50
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045851,,,,,,T,,M,,N,*1B
| $SDDBT,,,0001.5,M,,
| $GPGGA,045853,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*52
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045853,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,,
| $GPGGA,045855,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*54
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045855,,,,,,T,,M,,N,*1F
| $SDDBT,,,0001.5,M,,
| $GPGGA,045857,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*56
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045857,,,,,,T,,M,,N,*1D
| $SDDBT,,,0001.5,M,,
| $GPGGA,045859,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*58
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045859,,,,,,T,,M,,N,*1$SDDBT,,,0001.6,M,,
| $GPGGA,045901,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*54
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045901,,,,,,T,,M,,N,*1F
| $SDDBT,,,0001.6,M,,
| $GPGGA,045903,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*56
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045903,,,,,,T,,M,,N,*1D$SDDBT,,,0001.5,M,,
| $GPGGA,045905,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*50
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045905,,,,,,T,,M,,N,*1B
| $SDDBT,,,0001.5,M,,
| $GPGGA,045906,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*53
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045906,,,,,,T,,M,,N,*18
| $SDDBT,,,0001.6,M,,
| $GPGGA,045908,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*5D
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045908,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,,
| $GPGGA,045910,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*54
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045910,,,,,,T,,M,,N,*1F
| $SDDBT,,,0001.5,M,,
| $GPGGA,045912,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*56
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045912,,,,,,T,,M,,N,*1D$SDDBT,,,0001.5,M,,
| $GPGGA,045914,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*50
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045914,,,,,,T,,M,,N,*1B
| $SDDBT,,,0001.6,M,,
| $GPGGA,045916,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*52
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045916,,,,,,T,,M,,N,*19
| $SDDBT,,,0001.5,M,,
| $GPGGA,045918,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*5C
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045918,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,,
| $GPGGA,045920,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*58
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045920,,,,,,T,,M,,N,*1C
| $SDDBT,,,0001.5,M,,
| $GPGGA,045922,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5A
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045922,,,,,,T,,M,,N,*1E$SDDBT,,,0001.6,M,,
| $GPGGA,045924,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5C
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045924,,,,,,T,,M,,N,*18
| $SDDBT,,,0001.6,M,,
| $GPGGA,045926,2755.439,S,15324.368,E,2,6,01,+0004,M,,M,,*51
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045926,,,,,,T,,M,,N,*1A
| $SDDBT,,,0001.6,M,,
| $GPGGA,045928,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*50
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045928,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,,
| $GPGGA,045930,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*59
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045930,,,,,,T,,M,,N,*1D
| $SDDBT,,,0001.5,M,,
| $GPGGA,045932,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5B
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045932,,,,,,T,,M,,N,*1F$SDDBT,,,0001.5,M,,
| $GPGGA,045934,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5D
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045934,,,,,,T,,M,,N,*19
| $SDDBT,,,0001.5,M,,
| $GPGGA,045936,2755.439,S,15324.367,E,2,6,01,+0004,M,,M,,*5F
| $GPAPB,A,,,,N,,,,,,,,,*4B
| $GPBWC,045936,,,,,,T,,M,,N,*1B
| ----------------------------------------------------------------------
|
| Any help appreciated.
| Thanks
| Oliver Fleming
|
|
|
|
|
|
| "Oliver Fleming" <ojfleming at (no spam) internode.on.net> wrote in message
| news:Se-dnedGnpt_4ofVnZ2dnUVZ_hCdnZ2d at (no spam) internode...
| > Hi,
| > I am using Fugawi 4.1. I used to be able to set a series of route
| > points and the auto-pilot would follow these without problem.
| >
| > I installed a Noland Multiplexer, so I could interface my
depthsounder
| > and have depths in the tracks instead of height.
| >
| > This all works well.
| >
| > However I now find Fugawi will no longer follow the route with the
| > auto-pilot.
| >
| > I tried another Nav Program (OziExplorer) and although the function
is
| > rated 'experimental' it works just as it should.
| >
| > I have written to Fugawi, but there support is very poor and the
| > contact staff do not know much about anything ( they even said Fugawi
does
| > not use the Autopilot APB sentence. It does of course and is listed in
the
| > manual and help files. ). I have had so much trouble with this buggy
| > software they probably consider me a nuisance. I probably should buy
| > something else but I like the interface of Fugawi and am used to it, I
| > really do not want to learn another software.
| >
| > If anybody has a solution or has had this problem I sure would like
to
| > get a cure.
| >
| > Thanks
| > Oliver Fleming
| >
| >
|
| |
|
|
| Back to top |
|
| |
|
Page 1 of 1
All times are GMT - 5 Hours
The time now is Thu Jul 24, 2008 10:56 pm
|
|
