| |
 |
|
|
Science Forum Index » Electronics - Repair Forum » teac ct-m805sr - DEAD.
Page 1 of 1
|
| Author |
Message |
| toranaboy14 |
 Posted: Fri Feb 16, 2007 3:23 am |
|
|
|
Guest
|
Hi people, got the psu out of this rather large CRT set sitting
infrount of me here, (rest is out in my shed in bits.) I need help on
tracking down IC902 might be, as it has had the frount blown off the
chip leaving no markings. It is a 9 pin device sharing a big heatsink
with the bridge rectifier.
I probably also try to find out what made it go bang, it did have a
small slater crawling around in it when first pulled apart but no sign
ofany of its toasted brothers, fuse is intact, filter cap is staying
fully charged.
Any help would be appreciated, its an older set now but I think screen
size may save it from scrap if nothing else (80cm)
Joe. |
|
|
| Back to top |
|
| Homer J Simpson |
| Posted: Fri Feb 16, 2007 3:34 am |
|
|
|
Guest
|
"toranaboy14" <suziboy@tpg.com.au> wrote in message
news:1171610633.742025.238360@q2g2000cwa.googlegroups.com...
Quote: Hi people, got the psu out of this rather large CRT set sitting
infrount of me here, (rest is out in my shed in bits.) I need help on
tracking down IC902 might be, as it has had the frount blown off the
chip leaving no markings. It is a 9 pin device sharing a big heatsink
with the bridge rectifier.
Rectifier is probably a Schottky. IC is a switch of some sort. Make, model
etc for TV set? |
|
|
| Back to top |
|
| toranaboy14 |
| Posted: Fri Feb 16, 2007 7:18 pm |
|
|
|
Guest
|
On Feb 16, 6:34 pm, "Homer J Simpson" <nob...@nowhere.com> wrote:
Quote: "toranaboy14" <suzi...@tpg.com.au> wrote in message
news:1171610633.742025.238360@q2g2000cwa.googlegroups.com...
Hi people, got the psu out of this rather large CRT set sitting
infrount of me here, (rest is out in my shed in bits.) I need help on
tracking down IC902 might be, as it has had the frount blown off the
chip leaving no markings. It is a 9 pin device sharing a big heatsink
with the bridge rectifier.
Rectifier is probably a Schottky. IC is a switch of some sort. Make, model
etc for TV set?
teac ct-m805sr |
|
|
| Back to top |
|
| Deke |
| Posted: Sat Feb 17, 2007 10:15 am |
|
|
|
Guest
|
"toranaboy14" <suziboy@tpg.com.au> wrote in message
news:1171610633.742025.238360@q2g2000cwa.googlegroups.com...
Quote: Hi people, got the psu out of this rather large CRT set sitting
infrount of me here, (rest is out in my shed in bits.) I need help on
tracking down IC902 might be, as it has had the frount blown off the
chip leaving no markings. It is a 9 pin device sharing a big heatsink
with the bridge rectifier.
I probably also try to find out what made it go bang, it did have a
small slater crawling around in it when first pulled apart but no sign
ofany of its toasted brothers, fuse is intact, filter cap is staying
fully charged.
Any help would be appreciated, its an older set now but I think screen
size may save it from scrap if nothing else (80cm)
Joe.
Whats a slater? Bug? Lizard? Alien life form? |
|
|
| Back to top |
|
| Meat Plow |
| Posted: Sat Feb 17, 2007 10:56 am |
|
|
|
Guest
|
On Sat, 17 Feb 2007 08:15:42 -0600, Deke Has Frothed:
Quote:
"toranaboy14" <suziboy@tpg.com.au> wrote in message
news:1171610633.742025.238360@q2g2000cwa.googlegroups.com...
Hi people, got the psu out of this rather large CRT set sitting
infrount of me here, (rest is out in my shed in bits.) I need help on
tracking down IC902 might be, as it has had the frount blown off the
chip leaving no markings. It is a 9 pin device sharing a big heatsink
with the bridge rectifier.
I probably also try to find out what made it go bang, it did have a
small slater crawling around in it when first pulled apart but no sign
ofany of its toasted brothers, fuse is intact, filter cap is staying
fully charged.
Any help would be appreciated, its an older set now but I think screen
size may save it from scrap if nothing else (80cm)
Joe.
Whats a slater? Bug? Lizard? Alien life form?
Pill bug or Sow bug.
--
Pierre Salinger Memorial Hook, Line & Sinker, June 2004
COOSN-266-06-25794 |
|
|
| Back to top |
|
| Franc Zabkar |
| Posted: Sat Feb 17, 2007 6:05 pm |
|
|
|
Guest
|
On 15 Feb 2007 23:23:53 -0800, "toranaboy14" <suziboy@tpg.com.au> put
finger to keyboard and composed:
Quote: Hi people, got the psu out of this rather large CRT set sitting
infrount of me here, (rest is out in my shed in bits.) I need help on
tracking down IC902 might be, as it has had the frount blown off the
chip leaving no markings. It is a 9 pin device sharing a big heatsink
with the bridge rectifier.
My memory is very poor, but could it be a TDA4601 regulator?
Quote: I probably also try to find out what made it go bang, ...
Replace all the small electrolytic caps on the primary side of the
supply.
Quote: ... it did have a
small slater crawling around in it when first pulled apart but no sign
ofany of its toasted brothers, fuse is intact, filter cap is staying
fully charged.
Any help would be appreciated, its an older set now but I think screen
size may save it from scrap if nothing else (80cm)
Joe.
A service manual is available for AU$22:
http://spares.bigwarehouse.com.au/product_info.php?cPath=151_53066&products_id=1305559
Otherwise you could rent one from High Country:
http://www.hcsd.com.au/
- Franc Zabkar
--
Please remove one 'i' from my address when replying by email. |
|
|
| Back to top |
|
| |
|
Page 1 of 1
All times are GMT - 5 Hours
The time now is Wed Aug 27, 2008 8:27 pm
|
|