| |
 |
|
|
Science Forum Index » Electronics - Components Forum » Small rugged high-/lowside switches
Page 1 of 1
|
| Author |
Message |
| Oliver Betz |
 Posted: Mon Feb 05, 2007 4:29 pm |
|
|
|
Guest
|
Hello All,
I'm looking for rugged >=100mA >=30V high side and low side switches
for an industrial (24V) controller, protected against short circuit
and overload and preferably also ESD/EFT.
I need two high side and two low side switches, any combination from
one integrated device to four separate switches would be o.k.
Switching speed is not that important - slow is good for EMI.
Control voltage is 5V or 3,3V logic level.
Four SOT223 (Infineon Profet, Hitfet etc.) or SO8 devices would be too
large. Maybe a dual SO8 low side switch and two SO8 high side switches
will work. Smaller cases or two SO8 would be great.
Any recommendations?
Please note that I currently don't trust in IRF since they
discontinued the IPS021L months ago without a replacement *) and
without notice on their web site. It' _still_ listed as available!
TIA,
Oliver
*) The recommended IPS1041L and IPS2041L are wimps compared to the
IPS021.
--
Oliver Betz, Muenchen (oliverbetz.de) |
|
|
| Back to top |
|
| |
|
Page 1 of 1
All times are GMT - 5 Hours
The time now is Sat Oct 11, 2008 5:54 am
|
|