|
Science Forum Index » Electronics Forum » Help finding a connector.
Page 1 of 1
|
| Author |
Message |
| Chris W |
 Posted: Sat Mar 10, 2007 2:10 pm |
|
|
|
Guest
|
|
| Back to top |
|
| Ross Herbert |
| Posted: Sun Mar 11, 2007 3:48 am |
|
|
|
Guest
|
On Sat, 10 Mar 2007 12:10:57 -0600, Chris W <1qazse4@cox.net> wrote:
Is the ruler scale in 1/16" at top and 1/32" at bottom? It might help
us to know this detail. |
|
|
| Back to top |
|
| John Fields |
| Posted: Sun Mar 11, 2007 8:23 am |
|
|
|
Guest
|
On Sun, 11 Mar 2007 08:48:07 GMT, Ross Herbert
<rherber1@bigpond.net.au> wrote:
Quote: Is the ruler scale in 1/16" at top and 1/32" at bottom? It might help
us to know this detail.
---
It's in 1/32" increments at the top and 1/64" increments on the
bottom. Look at the markings to the left of the big "3".
--
JF |
|
|
| Back to top |
|
| Chris W |
| Posted: Sun Mar 11, 2007 11:45 am |
|
|
|
Guest
|
Some one on the s.e.components says it is a Molex 51021. Mouser and
digikey both sell it. Seems it is 1.25mm instead of 1.27 which is what
I was searching for and the drawing in the mouser catalog I was looking
it was at the worst possible angle to tell what it was. Anyway, not
the trick is going to be to attach the wires to the tiny pins... wish me
luck.
Chris W wrote:
--
Chris W
KE5GIX
"Protect your digital freedom and privacy, eliminate DRM,
learn more at http://www.defectivebydesign.org/what_is_drm"
Gift Giving Made Easy
Get the gifts you want &
give the gifts they want
One stop wish list for any gift,
from anywhere, for any occasion!
http://thewishzone.com |
|
|
| Back to top |
|
| Ross Herbert |
| Posted: Mon Mar 12, 2007 3:14 am |
|
|
|
Guest
|
On Sun, 11 Mar 2007 08:23:29 -0500, John Fields
<jfields@austininstruments.com> wrote:
Quote: On Sun, 11 Mar 2007 08:48:07 GMT, Ross Herbert
rherber1@bigpond.net.au> wrote:
Is the ruler scale in 1/16" at top and 1/32" at bottom? It might
help
us to know this detail.
---
It's in 1/32" increments at the top and 1/64" increments on the
bottom. Look at the markings to the left of the big "3".
Right... I didn't look at the 3rd pic. It isn't obvious from the first
2 which I did look at. |
|
|
| Back to top |
|
| nemo |
| Posted: Mon Mar 12, 2007 7:00 pm |
|
|
|
Guest
|
"Chris W" <1qazse4@cox.net> wrote in message
news:exCIh.25461$oJ1.5154@newsfe18.lga...
Try http://www.rscomponents.co.uk/
They do a hyoodge range of connectors.
If it's from a TV set, try a specialist TV spares place. |
|
|
| Back to top |
|
| John Fields |
| Posted: Mon Mar 12, 2007 10:36 pm |
|
|
|
Guest
|
On Mon, 12 Mar 2007 08:14:12 GMT, Ross Herbert
<rherber1@bigpond.net.au> wrote:
Quote: On Sun, 11 Mar 2007 08:23:29 -0500, John Fields
jfields@austininstruments.com> wrote:
On Sun, 11 Mar 2007 08:48:07 GMT, Ross Herbert
rherber1@bigpond.net.au> wrote:
Is the ruler scale in 1/16" at top and 1/32" at bottom? It might
help
us to know this detail.
---
It's in 1/32" increments at the top and 1/64" increments on the
bottom. Look at the markings to the left of the big "3".
Right... I didn't look at the 3rd pic. It isn't obvious from the first
2 which I did look at.
---
God, or the Devil, is in the details.
--
JF |
|
|
| Back to top |
|
| Jack |
| Posted: Tue Mar 13, 2007 1:34 am |
|
|
|
Guest
|
This connector is used on most new computers as the floppy drive power
connector.
You can buy one at any computer store that sells power supplies or drives.
"Chris W" <1qazse4@cox.net> wrote in message
news:exCIh.25461$oJ1.5154@newsfe18.lga...
|
|
|
| Back to top |
|
| Jack |
| Posted: Tue Mar 13, 2007 6:14 pm |
|
|
|
Guest
|
Sorry for my hasty submission. I see the connector is much smaller than I
thought.
"Jack" <grampajack@verizon.net> wrote in message
news:4CrJh.2073$vV3.943@trndny09...
Quote: This connector is used on most new computers as the floppy drive power
connector.
You can buy one at any computer store that sells power supplies or drives.
"Chris W" <1qazse4@cox.net> wrote in message
news:exCIh.25461$oJ1.5154@newsfe18.lga...
I have searched through mouser and digikey and can not find this
connector. I may have missed it but I did look. I too 3 photos of it as
close as I can get with my digital camera and here they are...
http://www.thewishzone.com/cdw/Connector1.jpg
http://www.thewishzone.com/cdw/Connector2.jpg
http://www.thewishzone.com/cdw/Connector3.jpg
as near as I can tell the pin spacing is .050" or 1.27mm. The connector
is to hook in power video and audio to a tiny 900 mhz transmitter.
--
Chris W
KE5GIX
"Protect your digital freedom and privacy, eliminate DRM,
learn more at http://www.defectivebydesign.org/what_is_drm"
Gift Giving Made Easy
Get the gifts you want &
give the gifts they want
One stop wish list for any gift,
from anywhere, for any occasion!
http://thewishzone.com
|
|
|
| Back to top |
|
| |
