| |
 |
|
|
Science Forum Index » Electronics - Design Forum » Recommendation for RF Prototype "Vector Board" with...
Page 1 of 1
|
| Author |
Message |
| RFI-EMI-GUY... |
 Posted: Thu Jul 10, 2008 11:31 pm |
|
|
|
Guest
|
Recommendation for RF Prototype "Vector Board" with groundplane needed
I am looking to prototype a couple of small boards containing LINX
TXM-433 LC and LR transmitter modules. These have pads on 0.1" centers
and thus will match the Vector board strips that I am familiar with.
However for this application, I need a ground plane under the module,
and so am looking for a "vector" board with strips, but without plated
through holes and ideally a solid ground plane on the reverse side. I
would prefer plated traces and fiberglass insulation.
These will be simple boards, a TXM-433-LC, a couple of 555 timers and
some discrete components.
Any recommendations?
--
Joe Leikhim K4SAT
"The RFI-EMI-GUY"©
"Treason doth never prosper: what's the reason?
For if it prosper, none dare call it treason."
"Follow The Money" ;-P |
|
|
| Back to top |
|
| John Larkin... |
| Posted: Thu Jul 10, 2008 11:42 pm |
|
|
|
Guest
|
On Fri, 11 Jul 2008 00:31:32 -0400, RFI-EMI-GUY
<Rhyolite at (no spam) NETTALLY.COM> wrote:
Quote: Recommendation for RF Prototype "Vector Board" with groundplane needed
I am looking to prototype a couple of small boards containing LINX
TXM-433 LC and LR transmitter modules. These have pads on 0.1" centers
and thus will match the Vector board strips that I am familiar with.
However for this application, I need a ground plane under the module,
and so am looking for a "vector" board with strips, but without plated
through holes and ideally a solid ground plane on the reverse side. I
would prefer plated traces and fiberglass insulation.
These will be simple boards, a TXM-433-LC, a couple of 555 timers and
some discrete components.
Any recommendations?
Bare copperclad FR4 and solder.
John |
|
|
| Back to top |
|
| RFI-EMI-GUY... |
| Posted: Thu Jul 10, 2008 11:47 pm |
|
|
|
Guest
|
John Larkin wrote:
Quote: On Fri, 11 Jul 2008 00:31:32 -0400, RFI-EMI-GUY
Rhyolite at (no spam) NETTALLY.COM> wrote:
Recommendation for RF Prototype "Vector Board" with groundplane needed
I am looking to prototype a couple of small boards containing LINX
TXM-433 LC and LR transmitter modules. These have pads on 0.1" centers
and thus will match the Vector board strips that I am familiar with.
However for this application, I need a ground plane under the module,
and so am looking for a "vector" board with strips, but without plated
through holes and ideally a solid ground plane on the reverse side. I
would prefer plated traces and fiberglass insulation.
These will be simple boards, a TXM-433-LC, a couple of 555 timers and
some discrete components.
Any recommendations?
Bare copperclad FR4 and solder.
John
I am trying to stay away from etching and "dead bug" style!
--
Joe Leikhim K4SAT
"The RFI-EMI-GUY"©
"Treason doth never prosper: what's the reason?
For if it prosper, none dare call it treason."
"Follow The Money" ;-P |
|
|
| Back to top |
|
| DJ Delorie... |
| Posted: Fri Jul 11, 2008 12:06 am |
|
|
|
Guest
|
PCB fab isn't that expensive. Design the board you want (i.e. strip
size, position, etc) and have someone make it. You get a discount
with multiple boards, so you'll have some for future projects too. |
|
|
| Back to top |
|
| |
|
Page 1 of 1
All times are GMT - 5 Hours
The time now is Tue Oct 14, 2008 2:38 am
|
|