| |
 |
|
|
Science Forum Index » Engineering - Joining (Welding) Forum » Multi-Mig Model 90070
Page 1 of 1
|
| Author |
Message |
| wikidwanda |
 Posted: Sun Jan 28, 2007 8:19 pm |
|
|
|
Guest
|
I just acquired a multi-mig welder model 90070. It looks brand new but
doesnt have a manual with it. it was either manufactured or distributed by
the (triple A Specialty co., 5750 W 51St., Chicago, Il 60638.
Would anyone have any Information on this welder and possible where I could
buy supplies for it (Wire and Gas).
Thanks In Advance |
|
|
| Back to top |
|
| RoyJ |
| Posted: Sun Jan 28, 2007 10:27 pm |
|
|
|
Guest
|
I hope you didn't pay much for it! :)
The address doesn't match to a company name, the location is a large
office/warehouse complex in Glenn, Ill, SW of downtown Chicago.
I did a quick search, not much came up. It's likely a rebrand of some
out of production or off shore manufacturer. If it works, fine. If not,
good luck on getting any parts.
More than likely it is set up for flux core wire. Just grab a 2 pound
spool of .030" flux wire at your local home store, set the electrode
positive (should be quite clear from markings in the area around the
drive wheel), and try it out. I would make sure it runs before investing
in any sort of gas regulators and bottles.
wikidwanda <wikidwanda wrote:
Quote: I just acquired a multi-mig welder model 90070. It looks brand new but
doesnt have a manual with it. it was either manufactured or distributed by
the (triple A Specialty co., 5750 W 51St., Chicago, Il 60638.
Would anyone have any Information on this welder and possible where I could
buy supplies for it (Wire and Gas).
Thanks In Advance
|
|
|
| Back to top |
|
| Keith Marshall |
| Posted: Sun Jan 28, 2007 10:56 pm |
|
|
|
Guest
|
wikidwanda wrote in message
Quote: I just acquired a multi-mig welder model 90070. It looks brand new but
doesnt have a manual with it. it was either manufactured or distributed by
the (triple A Specialty co., 5750 W 51St., Chicago, Il 60638.
Would anyone have any Information on this welder and possible where I
could
buy supplies for it (Wire and Gas).
Never heard of it but if you can post a picture somewhere, like maybe to the
drop box:
http://metalworking.com/dropbox.html
someone may recognize it and be able to help.
Best Regards,
Keith Marshall
tooladdict@progressivelogic.com
"I'm not grown up enough to be so old!" |
|
|
| Back to top |
|
| wikidwanda |
| Posted: Mon Jan 29, 2007 7:47 pm |
|
|
|
Guest
|
To answer both..
the welder was never used still has co'2 gas bottle full and regulator never
opened. The welder was purchased new about 10 years ago. I received the
welder for free from someone due to age would never use.
With a little digging I have found out the welder was made by (Telwin in
Italy) and distributed by Triple A Specialty co., Chicago, Il. Which seems
to have gone out of business.
What Iam looking for is anyone that might have info,(owners manual,where if
possible to still buy parts"Tips")
Only think I could find on net was someone selling one on e-bay with a pic.
http://cgi.ebay.com/Used-Multi-Mig-Welder-Model-90070-71_W0QQitemZ160046727112QQihZ006QQcategoryZ113743QQcmdZViewItem?hash=item160046727112
If iam in the wrong group "please" suggest where I might look!
Thanks in advance..
"Keith Marshall" <tooladdict@progressivelogic.com> wrote in message
news:45bd6276$0$5758$4c368faf@roadrunner.com...
Quote:
wikidwanda wrote in message
I just acquired a multi-mig welder model 90070. It looks brand new but
doesnt have a manual with it. it was either manufactured or distributed
by
the (triple A Specialty co., 5750 W 51St., Chicago, Il 60638.
Would anyone have any Information on this welder and possible where I
could
buy supplies for it (Wire and Gas).
Never heard of it but if you can post a picture somewhere, like maybe to
the
drop box:
http://metalworking.com/dropbox.html
someone may recognize it and be able to help.
Best Regards,
Keith Marshall
tooladdict@progressivelogic.com
"I'm not grown up enough to be so old!"
|
|
|
| Back to top |
|
| Grant Erwin |
| Posted: Mon Jan 29, 2007 8:44 pm |
|
|
|
Guest
|
Have a look at http://www.rps4wd.com/kw/mig/mig.htm
Grant
wikidwanda <wikidwanda wrote:
Quote: To answer both..
the welder was never used still has co'2 gas bottle full and regulator never
opened. The welder was purchased new about 10 years ago. I received the
welder for free from someone due to age would never use.
With a little digging I have found out the welder was made by (Telwin in
Italy) and distributed by Triple A Specialty co., Chicago, Il. Which seems
to have gone out of business.
What Iam looking for is anyone that might have info,(owners manual,where if
possible to still buy parts"Tips")
Only think I could find on net was someone selling one on e-bay with a pic.
http://cgi.ebay.com/Used-Multi-Mig-Welder-Model-90070-71_W0QQitemZ160046727112QQihZ006QQcategoryZ113743QQcmdZViewItem?hash=item160046727112
If iam in the wrong group "please" suggest where I might look!
Thanks in advance..
"Keith Marshall" <tooladdict@progressivelogic.com> wrote in message
news:45bd6276$0$5758$4c368faf@roadrunner.com...
wikidwanda wrote in message
I just acquired a multi-mig welder model 90070. It looks brand new but
doesnt have a manual with it. it was either manufactured or distributed
by
the (triple A Specialty co., 5750 W 51St., Chicago, Il 60638.
Would anyone have any Information on this welder and possible where I
could
buy supplies for it (Wire and Gas).
Never heard of it but if you can post a picture somewhere, like maybe to
the
drop box:
http://metalworking.com/dropbox.html
someone may recognize it and be able to help.
Best Regards,
Keith Marshall
tooladdict@progressivelogic.com
"I'm not grown up enough to be so old!"
|
|
|
| Back to top |
|
| IdaSpode |
| Posted: Tue Jan 30, 2007 3:16 am |
|
|
|
Guest
|
On Mon, 29 Jan 2007 23:47:19 GMT, "wikidwanda"
<wikidwanda<remove>@prodigy.net> wrote:
<snip>
Quote:
With a little digging I have found out the welder was made by (Telwin in
Italy) and distributed by Triple A Specialty co., Chicago, Il. Which seems
to have gone out of business.
What Iam looking for is anyone that might have info,(owners manual,where if
possible to still buy parts"Tips")
If iam in the wrong group "please" suggest where I might look!
Thanks in advance..
snip
If you haven't seen it already, you might follow up on this thread,
it's not that old:
Telwin MULTI MIG Welder Model 90070
http://www.hobartwelders.com/mboard/showthread.php?p=223699
DJ |
|
|
| Back to top |
|
| Potblak |
| Posted: Wed Jan 31, 2007 4:53 am |
|
|
|
Guest
|
If its a Telwin, then its probably got a Binzel-Style torch.
you should be able to get tips and torch parts from any Binzel, or
Binzel-Style torch stockist.
"wikidwanda @prodigy.net>" <wikidwanda<remove> wrote in message
news:bIvvh.14713$ji1.13199@newssvr12.news.prodigy.net...
Quote: To answer both..
the welder was never used still has co'2 gas bottle full and regulator
never
opened. The welder was purchased new about 10 years ago. I received the
welder for free from someone due to age would never use.
With a little digging I have found out the welder was made by (Telwin in
Italy) and distributed by Triple A Specialty co., Chicago, Il. Which seems
to have gone out of business.
What Iam looking for is anyone that might have info,(owners manual,where
if
possible to still buy parts"Tips")
Only think I could find on net was someone selling one on e-bay with a
pic.
http://cgi.ebay.com/Used-Multi-Mig-Welder-Model-90070-71_W0QQitemZ160046727112QQihZ006QQcategoryZ113743QQcmdZViewItem?hash=item160046727112
If iam in the wrong group "please" suggest where I might look!
Thanks in advance..
"Keith Marshall" <tooladdict@progressivelogic.com> wrote in message
news:45bd6276$0$5758$4c368faf@roadrunner.com...
wikidwanda wrote in message
I just acquired a multi-mig welder model 90070. It looks brand new but
doesnt have a manual with it. it was either manufactured or distributed
by
the (triple A Specialty co., 5750 W 51St., Chicago, Il 60638.
Would anyone have any Information on this welder and possible where I
could
buy supplies for it (Wire and Gas).
Never heard of it but if you can post a picture somewhere, like maybe to
the
drop box:
http://metalworking.com/dropbox.html
someone may recognize it and be able to help.
Best Regards,
Keith Marshall
tooladdict@progressivelogic.com
"I'm not grown up enough to be so old!"
|
|
|
| Back to top |
|
| |
|
Page 1 of 1
All times are GMT - 5 Hours
The time now is Thu Jul 24, 2008 4:09 pm
|
|
