| |
 |
|
|
Movies Forum Index » Movie Production (Sound) Forum » CUB1 TA5 wiring
Page 1 of 1
|
| Author |
Message |
| Douglas Tourtelot |
 Posted: Tue May 11, 2004 10:06 pm |
|
|
|
Guest
|
I am the new owner of two Sanken CUB1 mics. They are really good sounding!
I want to put a set of TA5 connectors in the line (these are wired for P48)
and was wondering if anyone knows the proper wiring scheme. That way, I can
use them wireless with Lectro transmitters or hardwire P48.
Thanks.
D. |
|
|
| Back to top |
|
| Eric Toline |
| Posted: Wed May 12, 2004 12:12 am |
|
|
|
Guest
|
CUB1 TA5 wiring
Group: rec.arts.movies.production.sound Date: Tue, May 11, 2004, 9:06pm
(EDT-3) From: tourtelot@nospamspeakeasy.net (Douglas Tourtelot)
I am the new owner of two Sanken CUB1 mics. They are really good
sounding! I want to put a set of TA5 connectors in the line (these are
wired for P48) and was wondering if anyone knows the proper wiring
scheme. That way, I can use them wireless with Lectro transmitters or
hardwire P48.
Thanks.
D. <<<<<<<<<<<<<<<<
Doug,
Black wire to pin 2.
White to pin 3.
Shield to pin1.
Jumper from pin 1 to pin 4
330pf capacitor from 1 to 2
330pf capacitor from 3 to 4
No connection to pin 5.
Eric |
|
|
| Back to top |
|
| Glen Trew |
| Posted: Wed May 12, 2004 5:19 pm |
|
|
|
Guest
|
Actually, though it looks like the COS-11 and the CUB-1 should be wired
identically, they are different inside. As luck would have it, the CUB-1 can
be wired the same as the COS-11 for the TA-5 Lectro transmitter, but they
cannot be wired the same as the COS-11 for the MM-400 (miniature)
transmitter. It can be done, but it requires a modification to the
microphone (discovered by Larry Fisher, Lectro Pres).
Glen Trew
"Eric Toline" <Audioetc@webtv.net> wrote in message
news:19422-40A1C04D-687@storefull-3256.bay.webtv.net...
CUB1 TA5 wiring
Group: rec.arts.movies.production.sound Date: Tue, May 11, 2004, 9:06pm
(EDT-3) From: tourtelot@nospamspeakeasy.net (Douglas Tourtelot)
I am the new owner of two Sanken CUB1 mics. They are really good
sounding! I want to put a set of TA5 connectors in the line (these are
wired for P48) and was wondering if anyone knows the proper wiring
scheme. That way, I can use them wireless with Lectro transmitters or
hardwire P48.
Thanks.
D. <<<<<<<<<<<<<<<<
Doug,
Black wire to pin 2.
White to pin 3.
Shield to pin1.
Jumper from pin 1 to pin 4
330pf capacitor from 1 to 2
330pf capacitor from 3 to 4
No connection to pin 5.
Eric |
|
|
| Back to top |
|
| |
|
Page 1 of 1
All times are GMT - 5 Hours
The time now is Wed Dec 03, 2008 3:31 pm
|
|