Main Page | Report Page

 

  Linux Forum Index » Linux M68K » Howto run a linux-2.6.x kernel on the uClinux ColdFire emula

Author Message
Harro Haan
Posted: Fri Oct 06, 2006 3:29 pm
 
I have used the latest ColdFire Emulator (version 0.3.1):
http://www.slicer.ca/coldfire/

I have installed the latest available distribution (20060803, contains
linux-2.6.17) an M68K/ColdFire tools (m68k-uclinux-20060615) and followed
the instructions on:
http://www.uclinux.org/ports/coldfire/source.html

Running a linux-2.4.x kernel isn't a problem. The things I have done for
this:
make config
selected Arnewsh 5206 and the linux-2.4.x and used defaults for the rest
make dep
make

When I do the the same for a linux-2.6.x kernel I don't get any output on
the serial ports (telnet localhost 5206 and telnet localhost 5207).

Does anyone now how to get it work?
Does it work with another board which is supported by the ColdFire emulator?

I have checked the start address which is 0x10000 with m68k-elf-objdump"

Thanks,

Harro
 
Wouter Verhelst
Posted: Mon Oct 09, 2006 7:44 am
 
"Harro Haan" <hr.haan@home.nl> writes:

Quote:
I have used the latest ColdFire Emulator (version 0.3.1):
http://www.slicer.ca/coldfire/

I have installed the latest available distribution (20060803, contains
linux-2.6.17) an M68K/ColdFire tools (m68k-uclinux-20060615) and followed
the instructions on:
http://www.uclinux.org/ports/coldfire/source.html

Running a linux-2.4.x kernel isn't a problem. The things I have done for
this:
make config
selected Arnewsh 5206 and the linux-2.4.x and used defaults for the rest
make dep
make

When I do the the same for a linux-2.6.x kernel I don't get any output on
the serial ports (telnet localhost 5206 and telnet localhost 5207).

Does anyone now how to get it work?

It is possible that the kernel you're running is not configured
properly. However, without having access to your .config, it's pretty
hard to verify that.

Could you please put it online somewhere? Please do _not_ attach it to
a reply message.

--
<Lo-lan-do> Home is where you have to wash the dishes.
-- #debian-devel, Freenode, 2004-09-22
 
Harro Haan
Posted: Thu Oct 12, 2006 6:52 pm
 
Hopefully you can help me out!

I have placed the .config files on:
http://members.home.nl/hr.haan/config_linux-2.4.x
http://members.home.nl/hr.haan/config_linux-2.6.x
http://members.home.nl/hr.haan/config_root_linux-2.4.x
http://members.home.nl/hr.haan/config_root_linux-2.6.x

Thanks in advance,

Harro

On Mon, 2006-10-09 at 12:44 +0200, Wouter Verhelst wrote:
Quote:
"Harro Haan" <hr.haan@home.nl> writes:

I have used the latest ColdFire Emulator (version 0.3.1):
http://www.slicer.ca/coldfire/

I have installed the latest available distribution (20060803, contains
linux-2.6.17) an M68K/ColdFire tools (m68k-uclinux-20060615) and followed
the instructions on:
http://www.uclinux.org/ports/coldfire/source.html

Running a linux-2.4.x kernel isn't a problem. The things I have done for
this:
make config
selected Arnewsh 5206 and the linux-2.4.x and used defaults for the rest
make dep
make

When I do the the same for a linux-2.6.x kernel I don't get any output on
the serial ports (telnet localhost 5206 and telnet localhost 5207).

Does anyone now how to get it work?

It is possible that the kernel you're running is not configured
properly. However, without having access to your .config, it's pretty
hard to verify that.

Could you please put it online somewhere? Please do _not_ attach it to
a reply message.

 
 
Page 1 of 1    
All times are GMT - 5 Hours
The time now is Thu Jul 24, 2014 3:08 pm