 |
|
| Linux Forum Index » Linux M68K » telnet:Unable to connect to remote host:Connection... |
|
Page 1 of 1 |
|
| Author |
Message |
| Aura Networks... |
 Posted: Sun Jun 07, 2009 5:07 am |
|
|
|
Guest
|
Hi sir,
I have doubt, how to telnet the AX4510... (From Debian Linux to
uClinux).
And uClinux to Linux working fine......
Through PC ok, but the thing is how to telnet the board, (command
prompt only, ping working fine).
I enabled all the required thinks in make menuconfig ( at (no spam) Busy box,
at (no spam) Network Applications->telnet, ->telnetd)
Tell me , is it required to select any other options in menuconfig or
any wrong here!!
//From P.C to board(Samsung AX4510)
bhagavan at (no spam) sys4:~$ telnet 192.168.1.2
Trying 192.168.1.2...
telnet: Unable to connect to remote host: Connection refused
bhagavan at (no spam) sys4:~$
//When i try to ping the ip. That time its working fine
bhagavan at (no spam) sys4:~$ ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=2.63 ms
64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=1.77 ms
64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=1.78 ms
64 bytes from 192.168.1.2: icmp_seq=4 ttl=64 time=1.78 ms
64 bytes from 192.168.1.2: icmp_seq=5 ttl=64 time=1.87 ms
64 bytes from 192.168.1.2: icmp_seq=6 ttl=64 time=1.75 ms
Regards,
Aura Networks |
|
|
| Back to top |
|
|
|
| Jerry Heyman... |
| Posted: Sun Jun 07, 2009 8:51 pm |
|
|
|
Guest
|
on Sunday 07 June 2009 11:07 am, laki.sreekanth at (no spam) gmail.com (Aura Networks)
wrote:
Quote: Hi sir,
I have doubt, how to telnet the AX4510... (From Debian Linux to
uClinux).
And uClinux to Linux working fine......
Through PC ok, but the thing is how to telnet the board, (command
prompt only, ping working fine).
I enabled all the required thinks in make menuconfig ( at (no spam) Busy box,
at (no spam) Network Applications->telnet, ->telnetd)
Tell me , is it required to select any other options in menuconfig or
any wrong here!!
//From P.C to board(Samsung AX4510)
bhagavan at (no spam) sys4:~$ telnet 192.168.1.2
Trying 192.168.1.2...
telnet: Unable to connect to remote host: Connection refused
bhagavan at (no spam) sys4:~$
//When i try to ping the ip. That time its working fine
bhagavan at (no spam) sys4:~$ ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=2.63 ms
64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=1.77 ms
64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=1.78 ms
64 bytes from 192.168.1.2: icmp_seq=4 ttl=64 time=1.78 ms
64 bytes from 192.168.1.2: icmp_seq=5 ttl=64 time=1.87 ms
64 bytes from 192.168.1.2: icmp_seq=6 ttl=64 time=1.75 ms
I cannot give you a specific answer as I'm not familiar with
uCLinux. I will say that just because you compiled in the options
to build telnetd for BusyBox doesn't necessarily mean that it's
listening.
From Debian, which can ping 192.168.1.2, I would try 'nmap' and
see which ports are enabled on uCLinux. Telnet uses port 25, and
normally that is disabled as telnet is a weak way (security wise)
to connect from an external machine.
Quote:
Regards,
Aura Networks
jerry
--
// Jerry Heyman | "It's not a 'right' if someone else
// Amiga Forever  | has to pay for it" - Ayn Rand
\\ // heymanj at acm dot org |
\X/ http://www.hobbeshollow.com |
|
|
| Back to top |
|
|
|
|
|
All times are GMT - 5 Hours
The time now is Wed Dec 02, 2009 7:12 pm
|
|