 |
|
| Computers Forum Index » Computer - Autocad » Block attribute problem... |
|
Page 1 of 1 |
|
| Author |
Message |
| EricBabula... |
 Posted: Mon May 18, 2009 1:21 pm |
|
|
|
Guest
|
I have a unique issue - can't find an answer for this one. I have a
drawing with a problem with all the blocks that have attributes. If I
want to move or copy any block with attributes, the attribute offsets
double to the distance, in the same direction that I'm moving or
copying the block.
Does that make sense? Let me elaborate.
If I move or copy any block that has an attribute, the attribute
doesn't stay with the block. Let's say I move a block 3'-0" at (no spam) 0
degrees. The block item moves 3'-0" at 0 degrees, but the attribute
moves 6'-0" at (no spam) 0 degrees. If I move the block 20'-0" at (no spam) 135 degrees, the
block item moves 20'-0" at (no spam) 135 degrees, but the attribute moves 40'-0"
at (no spam) 135 degrees.
The same thing happens if I copy the block.
I'm using AutoCAD 2009. Not sure what version the drawing was created
in - we received it from a vendor. They did use CAP for the modular
furniture layout (furniture blocks with attributes). But, the problem
is happening with all attributed blocks, including Column bubbles, not
just the CAP furniture pieces.
Any clues as to how to keep the attribute attached to the block? I'm
sure it's something simple like a 0/1 toggle, but I can't find the
correct command.
Thanks in advance,
Eric Babula |
|
|
| Back to top |
|
|
|
| strawberry... |
| Posted: Mon May 18, 2009 5:22 pm |
|
|
|
Guest
|
On May 18, 2:21 pm, EricBabula <ericbab... at (no spam) gmail.com> wrote:
Quote: I have a unique issue - can't find an answer for this one. I have a
drawing with a problem with all the blocks that have attributes. If I
want to move or copy any block with attributes, the attribute offsets
double to the distance, in the same direction that I'm moving or
copying the block.
Does that make sense? Let me elaborate.
If I move or copy any block that has an attribute, the attribute
doesn't stay with the block. Let's say I move a block 3'-0" at (no spam) 0
degrees. The block item moves 3'-0" at 0 degrees, but the attribute
moves 6'-0" at (no spam) 0 degrees. If I move the block 20'-0" at (no spam) 135 degrees, the
block item moves 20'-0" at (no spam) 135 degrees, but the attribute moves 40'-0"
at (no spam) 135 degrees.
The same thing happens if I copy the block.
I'm using AutoCAD 2009. Not sure what version the drawing was created
in - we received it from a vendor. They did use CAP for the modular
furniture layout (furniture blocks with attributes). But, the problem
is happening with all attributed blocks, including Column bubbles, not
just the CAP furniture pieces.
Any clues as to how to keep the attribute attached to the block? I'm
sure it's something simple like a 0/1 toggle, but I can't find the
correct command.
Thanks in advance,
Eric Babula
Is it a dynamic block? |
|
|
| Back to top |
|
|
|
| Rowley... |
| Posted: Tue May 19, 2009 3:18 am |
|
|
|
Guest
|
Not sure if it is the reason - but there is a "lock position" function
to attributes..
Only other thing I could think of to suggest is writing out the block
and opening it and seeing what you can find - maybe it's an issue of not
having the same font....
Martin
EricBabula wrote:
Quote: I have a unique issue - can't find an answer for this one. I have a
drawing with a problem with all the blocks that have attributes. If I
want to move or copy any block with attributes, the attribute offsets
double to the distance, in the same direction that I'm moving or
copying the block.
Does that make sense? Let me elaborate.
If I move or copy any block that has an attribute, the attribute
doesn't stay with the block. Let's say I move a block 3'-0" at (no spam) 0
degrees. The block item moves 3'-0" at 0 degrees, but the attribute
moves 6'-0" at (no spam) 0 degrees. If I move the block 20'-0" at (no spam) 135 degrees, the
block item moves 20'-0" at (no spam) 135 degrees, but the attribute moves 40'-0"
at (no spam) 135 degrees.
The same thing happens if I copy the block.
I'm using AutoCAD 2009. Not sure what version the drawing was created
in - we received it from a vendor. They did use CAP for the modular
furniture layout (furniture blocks with attributes). But, the problem
is happening with all attributed blocks, including Column bubbles, not
just the CAP furniture pieces.
Any clues as to how to keep the attribute attached to the block? I'm
sure it's something simple like a 0/1 toggle, but I can't find the
correct command.
Thanks in advance,
Eric Babula |
|
|
| Back to top |
|
|
|
| Bob... |
| Posted: Tue May 19, 2009 10:29 am |
|
|
|
Guest
|
Quote: The same thing happens if I copy the block.
A little question. what you mean whith this sentence? Do you mean
copying it in the same drawing to an another coordinate or copy/paste
the block in a new drawing?
If you haven't did the last one, try it. This way you can see it if
it's the block itself or a drawing feauture which you can set to I/O.
Maybe a clue what happens to your drawing in the next link:
http://hyperpics.blogs.com/beyond_the_ui/2005/05/autocad_2006_lo.html
Also read the comments.
Gr.
Houtig |
|
|
| Back to top |
|
|
|
| TheScullster... |
| Posted: Wed Jun 17, 2009 12:21 pm |
|
|
|
Guest
|
"EricBabula" wrote
Quote: I have a unique issue - can't find an answer for this one. I have a
drawing with a problem with all the blocks that have attributes. If I
want to move or copy any block with attributes, the attribute offsets
double to the distance, in the same direction that I'm moving or
copying the block.
Does that make sense? Let me elaborate.
If I move or copy any block that has an attribute, the attribute
doesn't stay with the block. Let's say I move a block 3'-0" at (no spam) 0
degrees. The block item moves 3'-0" at 0 degrees, but the attribute
moves 6'-0" at (no spam) 0 degrees. If I move the block 20'-0" at (no spam) 135 degrees, the
block item moves 20'-0" at (no spam) 135 degrees, but the attribute moves 40'-0"
at (no spam) 135 degrees.
The same thing happens if I copy the block.
I'm using AutoCAD 2009. Not sure what version the drawing was created
in - we received it from a vendor. They did use CAP for the modular
furniture layout (furniture blocks with attributes). But, the problem
is happening with all attributed blocks, including Column bubbles, not
just the CAP furniture pieces.
Any clues as to how to keep the attribute attached to the block? I'm
sure it's something simple like a 0/1 toggle, but I can't find the
correct command.
Thanks in advance,
Eric Babula
Have you tried creating a new block in the same drawing to see if it behaves
in the same way?
If it doesn't, then this may indicate that it's the method, or the software
used, to create the existing blocks that is causing the problems.
Phil |
|
|
| Back to top |
|
|
|
|
|
All times are GMT
The time now is Tue Dec 08, 2009 12:35 pm
|
|