| Computers Forum Index » Computer - DCOM - Net Management » MRTG Traffic Problem when reached 120MB... |
|
Page 1 of 1 |
|
| Author |
Message |
| ... |
 Posted: Sun Nov 09, 2008 2:51 pm |
|
|
|
Guest
|
I would like to enquire why is the MRTG traffic starts up from the
bottom again when it reached around 120MB?Does anyone know how to
resolve this easily?
I did some research online, all would suggest change to SNMPV2 with
64bits counter but my router does not support SNMPV2, any other
solution for this? Any help would be highly appreciated. Thank You. |
|
|
| Back to top |
|
|
|
| Ronnie Higginbotham... |
| Posted: Mon Nov 10, 2008 4:42 am |
|
|
|
Guest
|
SNMPv2c
If you have a fast router you might want to try to poll the ifHC* counters.
This feature gets activated by switching to SNMPv2c. Unfortunately not all
devices support SNMPv2c yet. If it works, this will prevent your counters
from wraping within the 5 minute polling interval, since we now use 64 bit
instead of the normal 32 bit.
Example:
Target[myrouter]:
2:public at (no spam) router1:::::2http://oss.oetiker.ch/mrtg/doc/mrtg-reference.en.htmlSearch
SNMPv2Ronnie
<jasminecheang at (no spam) gmail.com> wrote in message
news:d096d6e7-d0b1-4b26-9a0d-b873fb370a17 at (no spam) b38g2000prf.googlegroups.com...
Quote: I would like to enquire why is the MRTG traffic starts up from the
bottom again when it reached around 120MB?Does anyone know how to
resolve this easily?
I did some research online, all would suggest change to SNMPV2 with
64bits counter but my router does not support SNMPV2, any other
solution for this? Any help would be highly appreciated. Thank You. |
|
|
| Back to top |
|
|
|
| Ronnie Higginbotham... |
| Posted: Mon Nov 10, 2008 4:47 am |
|
|
|
Guest
|
Post messed up on typing.
Search http://oss.oetiker.ch/mrtg/doc/mrtg-reference.en.html find SNMPv2.
_____________________________________________________________
SNMPv2c
If you have a fast router you might want to try to poll the ifHC* counters.
This feature gets activated by switching to SNMPv2c. Unfortunately not all
devices support SNMPv2c yet. If it works, this will prevent your counters
from wraping within the 5 minute polling interval, since we now use 64 bit
instead of the normal 32 bit.
Example:
Target[myrouter]: 2:public at (no spam) router1:::::2
"Ronnie Higginbotham" <rhigginb at (no spam) swbell.net> wrote in message
news:hIJRk.7455$ZP4.524 at (no spam) nlpi067.nbdc.sbc.com...
Quote: SNMPv2c
If you have a fast router you might want to try to poll the ifHC*
counters. This feature gets activated by switching to SNMPv2c.
Unfortunately not all devices support SNMPv2c yet. If it works, this will
prevent your counters from wraping within the 5 minute polling interval,
since we now use 64 bit instead of the normal 32 bit.
Example:
Target[myrouter]:
2:public at (no spam) router1:::::2http://oss.oetiker.ch/mrtg/doc/mrtg-reference.en.htmlSearch
SNMPv2Ronnie
jasminecheang at (no spam) gmail.com> wrote in message
news:d096d6e7-d0b1-4b26-9a0d-b873fb370a17 at (no spam) b38g2000prf.googlegroups.com...
I would like to enquire why is the MRTG traffic starts up from the
bottom again when it reached around 120MB?Does anyone know how to
resolve this easily?
I did some research online, all would suggest change to SNMPV2 with
64bits counter but my router does not support SNMPV2, any other
solution for this? Any help would be highly appreciated. Thank You.
|
|
|
| Back to top |
|
|
|
|
